Since the Dometic 300 Weekender RV Toilet # DOM64FR does not have a hand sprayer normally you can absolutely install it without the hand-sprayer # DOM75FR.
This hand-sprayer can be added after the fact if you decided you wanted one in the future. view full answer...
The only brackets we currently offer for RV steps are the Lippert Outriggers for Manual RV Steps # LC301704, which would mount directly to the frame of the trailer. Supports are definitely needed to hold the steps securely to the trailer frame and help prevent as much of a springboard effect when walking up or down the steps. Lippert is essentially stating to either mount it directly to the frame or build a frame off of the trailer frame to securely attach your steps, which you could do... view full answer...
The acceptable power range for the Power Watchdog Surge Protector with Bluetooth - Portable - 50 Amp # HU47FR is between 104 volts - 132 volts, just like with the 30 amp # HU97FR. I recommend placing the low end at 109v and the high end 127v so that you have a 5v buffer to notify you before it gets out of the safe zone. view full answer...
If only the axle is bent then you can go with just a new axle and reuse all of the other components like the hubs, bearings, brake assemblies, etc. To pick out the correct replacement axle you will need to get the hub face to hub face dimension of your axle as well as the spring seat center to spring seat center and the axle weight capacity.
I don't have a way to look that up so you'd have to get me that info and I can see if it's an axle we carry or one that you'd have to order locally.... view full answer...
The Solar Powered LED Porch Light for RVs part # DG0115 is not designed to be mounted on the exterior of an RV at highway speed. However, if you were to secure the light using a wall stud on your trailer then I don't see an issue doing so though I do recommend you go to the hardware store and obtain two 2" sheet metal screws at the minimum to secure the base. Once you find the stud you will want to install one screw leaving about 1/8" between the wall and bottom of the head to slide the... view full answer...
Go To Results